How to Install the Magnetic RokLock Plug on Your Phone
By Protective Cases & Accessories for Apple iPhone and Samsung | Published: 2026-10-21
Category: How-to Guides
Learn how to install the Magnetic RokLock Plug in minutes. This guide covers the simple steps, common mistakes, and why it strengthens your magnetic hold.
Quick Answer
Installing the Magnetic RokLock Plug takes about a minute: remove your phone from the case, snap the plug into the RokLock hole, and reassemble. No tools or adhesives are needed.
Why the Magnetic RokLock Plug Is Worth Installing
The Magnetic RokLock Plug is not just a port cover. It converts any RokLock case into a Dual Magnet Force system, giving you a stronger, more secure hold on magnetic surfaces. If you already rely on magnetic mounts, this small upgrade can make a noticeable difference in stability, especially on bumpy roads or in windy conditions.
The plug works with all Rokform RokLock cases and the Universal Adapter, so it is a simple add-on regardless of your phone model. Its Super Grip TPU face also helps prevent slipping, which is useful when you grab your phone quickly from a magnetic mount.
One trade-off to consider: the plug covers the RokLock hole, which means you cannot use the standard RokLock twist-lock mount at the same time. If you frequently switch between twist-lock and magnetic mounts, you will need to remove the plug each time. For most users who stick to magnetic mounting, the stronger hold is worth the trade-off.
Step-by-Step Installation
- Remove your phone from the case: Take your phone out of the RokLock case and set it aside on a clean, flat surface. You need access to the back of the case where the RokLock hole is located. Do not attempt to install the plug while the phone is in the case—you will not be able to press it in properly.
- Locate the RokLock hole on the case: Find the circular recess on the back of the case, usually centered near the bottom. This is the same hole used for the twist-lock mount. If you have a Universal Adapter, the hole is on the adapter itself—make sure it is attached to your device before continuing.
- Snap the Magnetic RokLock Plug into the hole: Hold the plug with the flat TPU face outward and press it firmly into the RokLock hole until it clicks into place. You should feel a secure fit with no wobble. If the plug does not sit flush, remove it and realign—do not force it, as that could damage the case or plug.
- Reinsert your phone into the case: Slide your phone back into the case, ensuring the plug remains seated and the case snaps closed properly. Check that the plug is still flush from the outside. A quick visual check now can save you from discovering a loose plug later when you mount your phone.
- Test the magnetic hold: Place your phone on a magnetic surface or mount and give it a gentle tug. The Dual Magnet Force should feel noticeably stronger than without the plug. If the hold feels weak, double-check that the plug is fully snapped in and the case is not warped.
Product Fact: Magnetic RokLock Plug
- Magnetic RokLock® Plug: Works with ALL Rokform RokLock cases and the Universal Adapter, and converts them into Dual Magnet Force. You can use this single accessory across multiple cases or devices without needing separate mounts.
Magnetic RokLock® Plug - Magnetic RokLock® Plug: The Super Grip TPU face prevents slipping. Your phone stays put when you grab it from a mount, reducing accidental drops.
