How to Install a Vibration Dampener Kit with Your Motorcycle Phone Mount
By Protective Cases & Accessories for Apple iPhone and Samsung | Published: 2026-10-26
Category: How-to Guides
Learn how to install a motorcycle vibration dampener kit with your phone mount step by step, avoid common mistakes, and protect your phone from road vibration damage.
Quick Answer
To install a vibration dampener kit with your motorcycle phone mount, mount the dampener between the handlebar clamp and the phone mount, tighten all fasteners to spec, and test for stability before riding.
Why the dampener goes between the mount and the phone
The vibration dampener's job is to isolate your phone from the engine and road vibrations that travel up through the handlebars. That only works when the dampener sits between the rigid mounting point and the phone holder. If you bolt the mount directly to the bars and attach the dampener elsewhere, you are not solving the problem.
A common trade-off: adding a dampener increases the distance between the handlebar and your phone, which can change how the mount feels when you reach for it. That is a small price for the protection it provides, especially if you ride a bike with a high-vibration engine or frequently ride on rough pavement.
Installation Steps
- Gather your tools and check the parts: You will need the handlebar clamp, the vibration dampener, the phone mount, and the appropriate hex keys or wrenches. Lay out all parts and confirm the dampener has the correct thread pattern to connect the clamp and the mount. Check that the dampener threads match both the clamp and the mount before you start tightening anything.
- Attach the handlebar clamp to your motorcycle: Position the clamp on the handlebar where you want the phone to sit, then tighten the clamp bolts evenly. Use a torque wrench if the manufacturer specifies a torque value; overtightening can crack the clamp or damage the bar. Tighten the clamp bolts in small increments to keep the clamp centered on the bar.
- Screw the vibration dampener into the clamp: Thread the dampener onto the clamp's mounting point by hand first to avoid cross-threading. Once it is snug, use a wrench to tighten it, but do not overtighten—you want it secure, not deformed. If the dampener does not thread smoothly, stop and realign it; forcing it can strip the threads.
- Mount the phone holder onto the dampener: Attach the phone mount to the top of the dampener using the provided ball or socket joint. Adjust the angle so the phone faces you clearly, then tighten the locking mechanism to hold the position. Before fully tightening, move the phone holder through its full range of motion to make sure it does not hit the fuel tank or fairing.
- Test the setup before you ride: With the phone secured, push and pull on the mount to check for any wobble. Start the engine and rev it a few times to see how much vibration reaches the phone. If the phone still shakes noticeably, recheck the tightness of every connection. A quick shake test at a standstill can prevent a phone loss or damage on the road.
Product Facts
- Motorcycle Pro Ball Phone Mount + Vibration Dampener Kit: This bundle pairs the Pro Ball Motorcycle Phone Mount with the Motorcycle Vibration Dampener for a complete mounting solution. You get both parts in one purchase, so you do not have to worry about compatibility or buying a separate dampener that might not fit your mount.
Motorcycle Pro Ball Phone Mount + Vibration Dampener Kit
