How to Use a Magnetic Tripod Mount for Stable Photos

Quick answer

Attach the magnetic adapter to your phone, snap it onto the tripod mount, and use a remote shutter or timer to eliminate shake.

How to set up your magnetic tripod mount

1. 1. Attach the adapter to your phone: Peel the 3M adhesive backing and press the metal plate or magnetic adapter onto the back of your phone or inside your case. Center it so the phone balances on the mount. Wait 24 hours for the adhesive to cure before heavy use. If your phone already has a magnetic case, skip the adhesive plate and snap directly.
2. 2. Mount the tripod head to the magnetic base: Screw the magnetic mount onto your tripod's standard 1/4-20 thread. Hand-tighten until snug — do not use pliers or a tool, which can strip the thread. The magnetic face should face upward or forward depending on your tripod head angle. Check that the mount does not wobble; if it does, add a rubber washer between the mount and tripod head.
3. 3. Attach your phone and compose the shot: Bring your phone near the magnetic mount — it will snap into place. Adjust the tripod head so the phone is level. Use the phone's grid lines (Settings > Camera > Grid) to align horizons and vertical lines. For vertical portraits, rotate the tripod head 90 degrees. The magnet holds just as firmly in portrait orientation.
4. 4. Use a remote trigger or timer to avoid shake: Even with a sturdy tripod, pressing the shutter button with your finger can blur long exposures. Use a Bluetooth remote, your smartwatch, or set a 3-second timer. For night shots, use a 10-second timer to let any vibration settle. If you do not have a remote, plug in wired earphones and use the volume button as a shutter release.
5. 5. Remove and store the mount properly: When done, pull the phone straight off the mount — do not twist or slide it sideways, which can scratch the back glass. Store the magnetic mount attached to the tripod or in a padded pouch. Keep the adhesive plate dry and clean. If the adhesive loses grip over time, clean both surfaces with isopropyl alcohol and let dry before reapplying.

What you need

• Magnetic Tripod Phone Mount and Adapter: The Magnetic Tripod Phone Mount and Adapter combines a tripod mount with Rokform magnets for easy dual use — no screwing on and off. You can switch between shooting on a tripod and handheld without fumbling with threads, saving time and reducing missed shots.