Install iPhone 17 Pro Tempered Glass Screen Protector

Quick answer

Clean your screen thoroughly in a dust-free area, align the Rokform tempered glass protector carefully, and press from the center outward to avoid bubbles.

Step-by-step installation

1. Prepare your workspace and screen: Turn off your iPhone 17 Pro and wipe the display with the included alcohol pad and microfiber cloth. Use the provided dust removal sticker to pick up any remaining specks. If you see a speck after cleaning, use a fresh sticker – do not blow on the screen (saliva droplets cause bubbles).
2. Remove the backing and align the protector: Peel the clear backing from the Rokform glass protector. Hold it by the edges and hover it above the screen, using the earpiece and home button cutouts as alignment guides. Lower it gently once centered. Misalignment is common – lower one edge first, then slowly let the rest of the glass contact the screen.
3. Press from the center and push out bubbles: Use the included squeegee or a soft card to press firmly from the center toward the edges. Work in overlapping strokes to push trapped air out. A small bubble near the edge may disappear in 24 hours. For stubborn bubbles, lift the nearest corner and re-press.
4. Final check and cure time: Inspect the edges for full adhesion. Leave the phone face-up for at least 30 minutes before using a case or pressing hard on the screen. Avoid sliding the phone into a tight case immediately – the adhesive needs time to bond fully.

Product fact

• iPhone 17 Pro Tempered Glass Screen Protector: Engineered for ultimate durability and clarity, this premium protector delivers next-level screen protection without sacrificing touch sensitivity or brightness. You get scratch and drop resistance without a dim or sticky screen surface, which is critical for daily use and outdoor readability.