Replace Adhesive Disc on Rokform Mount

Quick answer

To replace the adhesive disc on your Rokform mount, order a compatible tape dot replacement, remove the old adhesive, clean the mounting surface, and apply the new tape dot.

Steps to replace the adhesive disc

1. Remove the old adhesive disc: Peel off the worn 3M adhesive disc from the bottom of your Rokform mount. If it's stubborn, use a plastic pry tool or heat gently with a hairdryer to soften the adhesive. Avoid metal tools that could scratch the mount. Do not reuse the old disc; even if it looks clean, its grip is compromised.
2. Clean the mounting surface: Wipe the mount's base with isopropyl alcohol (70% or higher) on a lint-free cloth. Remove all residue and let it dry completely for 2–3 minutes. Any leftover adhesive or oil will prevent the new disc from bonding. A clean, dry surface is essential for maximum adhesion.
3. Apply the new tape dot: Peel the backing from the new Tape Dot Replacement and center it on the mount's base. Press firmly for 30 seconds, working from the center outward to eliminate air bubbles. Wait at least 1 hour before attaching the mount to your dashboard or surface for full bond strength. Skipping the wait time may cause the mount to fall off under vibration or heat.

What you'll need

• Tape Dot Replacement for Low Pro and Swivel Dash Mount: The Tape Dot Replacement for BAM Mount replaces only the 3M adhesive; you keep your existing BAM Mount. You restore full adhesion without buying a whole new mount, saving both money and installation time.